User's Manual
Version 1.0 ©Copyright 2016, Ambient LLC. All Rights Reserved. Page 5
QTY Item Image
1 Manual
1 Power Adapter
Figure 1
4.2 RecommendTools
• Precision screwdriver (for small Phillips screws)
• Compass or GPS (for wind direction calibration)
• Adjustable Wrench
• Hammer and nail for hanging remote thermo-hygrometer transmitter.
4.3 AnemometerAssemblySensorSetUp
The anemometer assembly consists of the wind cups, wind vane, solar panel, bubble level, sensor
mounting bracket and mounting foot.
Figure 2
Locate the battery door on the anemometer transmitter, push and open the battery compartment,
as shown in
Wind Vane
Wind Cups
Sensor
Mounting
Bracket
Solar Panel
Bubble Level
Foot-mounting