User's Manual
Version 1.0 ©Copyright 2016, Ambient LLC. All Rights Reserved. Page 31
14. Outdoor (channel 1) dew point low alarm
15. Absolute pressure high alarm
16. Absolute pressure low alarm
17. Relative pressure high alarm
18. Relative pressure low alarm
19. Indoor temperature high alarm
20. Indoor temperature low alarm
21. Indoor humidity high alarm
22. Indoor humidity low alarm
Note: To prevent repetitive temperature alarming, there is a 0.9 °F tolerance band. For
example, if you set the high alarm to 80.0 °F and silence the alarm, the alarm icon will continue to
flash until the temperature falls below 79.1°F, at which point, the alarm will reset and must
increase above 80.0 °F to activate again.
Note: To prevent repetitive alarming of humidity, there is a 4% tolerance band. For example,
if you set the high alarm to 60% and silence the alarm, the alarm icon will continue to flash until
the humidity falls below 56%, at which point, the alarm will reset and must increase above 60% to
activate again.
8.4 AlarmandCommandKeyBeeperON/OFFMode
The beeper can be silenced for both alarms and key strokes.
In normal mode, press and hold the HISTORY/- key for three seconds to toggle the beeper on or
off (depending on the current setting).
The BUZZON (beeper on) or BUZZOFF (beeper off) icon will appear in the time area for three
seconds. Press and hold the HISTORY/- key again for three seconds to toggle the BUZZON or
BUZZOFF command.
9 OtherConsoleFeatures
The following section describes additional features.
9.1 Feel sLikeTemperature
Feels like temperature is a combination of Heat Index and Wind Chill.
At temperatures less than 40°F, the wind chill is displayed, as shown in the National Weather
Service Wind Chill Table below: