User's Manual

2. Rainfall. Press the CHANNEL/+ or HISTORY/- key to toggle between 1h, 24h, week,

month and total.

3. Absolute Pressure and Relative Pressure Press the CHANNEL/+ or HISTORY/- key

to toggle between absolute pressure and relative pressure.

4. 72h or 24h Graph Record. Press the CHANNEL/+ or HISTORY/- key to toggle

between the last -72 hours or -24 hours record time. Each bar represents the

corresponding data and time for wind speed, rainfall, pressure, temperature or

humidity.( default is -72 hours)

Figure 21

Note: The graph displays hours on the horizontal or x-axis (the most recent data to the right of

the graph). For example, 0h is the current data and -12 is 12 hours ago. The vertical axis or y-axis

auto-scales, displays the deviation from the current value (the most recent data will always display

0). For example, when temperature is displayed, if the bar displays 0.4, this represents 0.4 degrees

higher than the current value.

7.2  Set(Program)Mode

While in Normal Mode, press and hold the SET key for at least three seconds to enter the Set

Mode. The first setting will begin flashing. You can press the SET key again to skip any step, as

defined below.

Note: In the Set mode, press the [+] key or [-] key to change or scroll the value. Hold the [+]

key or [-] key for three seconds to increase/decrease rapidly.

Note: To exit the Set mode at any time, press the SNOOZE/LIGHT button on the top of the

display console.

1. 12/24 Hour Format (default: 12h):. Press the SET key again to adjust the 12/24 hour format

setting (FMT). Press the [+] key or [-] key to change between 12 hour and 24 hour format.

2. Change Hour. Press the SET key again to set the hour. Press the [+] key or [-] key to adjust

the hour up or down. Note the PM icon is present during afternoon hours.

3. Change Minute. Press the SET key again to set the minute. Press the [+] key or [-] key to

adjust the minute up or down.

4. Date Format (default: MM-DD): Press the SET key again to enter the day/month format