User's Manual

While in the search mode, the remote search icon will be constantly displayed.

If you have more than once remote sensor (up to eight remotes are supported), the

display will automatically toggle between sensors until all sensors have reported in.

Do not touch any buttons until the remote sensor has reported in, or the radio search icon

is no longer on, otherwise the remote sensor search mode will be terminated. When

the remote sensor temperature and humidity has been received, the console will

automatically switch to the normal mode, and all further settings can be performed.

If the remote does not update, please reference the troubleshooting guide in Section 10.

Note: The power adapter is intended to be correctly oriented in a vertical or floor

mounted position. The prongs are not designed to hold the plug in place if it is plugged into a

ceiling, under-the-table or cabinet outlet.

Figure 5

Note: If the power adapter is plugged in, AC ON will display in the time area for three

seconds when powered up. Conversely, if the power adapter is not plugged in, AC OFF will

be displayed.

2.4.1 Display Console Layout

Note: The following illustration shows the full segment LCD display for description purposes

only and will not appear like this during normal operation.

Page