User's Manual

9. Temperature Units of Measure (default: °F):. Press the SET key again to change the

temperature units of measure (the UNITSET icon will be displayed). Press the [+] key to

switch between °F and °C units of measure.

10. Barometric Pressure Display Units (mmhg, inHg or hPa). Press the SET key again to

change the pressure units of measure (the UNITSET icon will be displayed). Press the [+]

key to toggle the pressure units between mmhg, inHg or hPa.

11. Pressure Threshold Setting (default level 2). Press the SET key again adjust the Pressure

threshold setting (the WEATHER icon will be displayed). Press [+] key or [-] key to adjust

the pressure threshold setting up or down. Refer to Section 7.4 for more details on this

function.

12. Storm Threshold Setting (default level 4). Press the SET key again entering into the storm

threshold setting (the STORM icon will be displayed). Press the [+] key or [-] key to adjust

the storm threshold up or down. Refer to Section 7.3 for more details on this function.

13. Weather Forecast Icon Setting (default: partly cloudy). Press the SET key again to set the

weather forecast icon initial conditions (based on the current weather conditions). Press the [+]

key or [-] key to toggle weather icons between sunny, partly cloudy, cloudy, or rainy.

Note: On a sunny day, from 7:01 am to 6:59 pm, the daytime icon is displayed (sun).

From 7:00 pm to 7:00 am, the nighttime icon is displayed (moon and stars).

14. Backlight Color Setting (default: Indoors). Press the SET key again to set the backlight

color defined parameter (the LED icon will be displayed). Press [+] key or [-] key to toggle

between IN (uses the indoor temperature to automatically display backlight color), OUT (uses

the outdoor temperature to automatically display backlight color) or USE (manually set your

own backlight color to one of 11 choices).

The following section is based on the IN, OUT or USE setting selected.

14.1 IN Backlight Color Setting (reference Figure 10).

14.2 Indoor Backlight Color Low (IN default: 58): Press the SET key again to change

the lower range of the color changing backlight spectrum (the LOWER icon will be

displayed). Press the [+] key or [-] key to adjust the low temperature limit.

14.3 Indoor Backlight Color High (default: 84): Press the SET key again to change the

upper range of the color changing backlight spectrum (the UPPER icon will be

displayed).

14.4 OUT Backlight Color Setting (reference Figure 10).

14.5 Outdoor Backlight Color Low (OUT default: 10): Press the SET key again to

change the lower range of the color changing backlight spectrum (the LOWER icon

will be displayed). Press the [+] key or [-

] key to adjust the low temperature limit.

14.6 Indoor Backlight Color High (default: 100): Press the SET key again to change

the upper range of the color changing backlight spectrum (the UPPER icon will be

displayed).

14.7 USE Backlight Color Setting (reference Figure 10).

14.8 Backlight Color (USE): Press the SET key again to manually select the backlight

color (the COLOR icon will be displayed). Press [+] key or [-] key to choose among