User's Manual

Table Of Contents

temperature readings. Although the sensor is water resistant, it is best to mount in

a well protected area, such as under an eve. Use a screw or nail (not included) to

affix the remote sensor to the wall, as shown in Figure 6.

Figure 6

4. Display Features

4.1 Comfort Icon

The comfort icon is based on humidity ranges specified in Figure 7 . The icon

is displayed for indoor humidity, remote channel 1 humidity and optional remote

channels 2 through 8 humidity.

Figure 7

4.2 Rate of Change Icon

The rate of change icon detects rapid changes in temperature and humidity.

If the arrow points upward, the temperature is increasing at a rate of +2°F per

30 minutes (or greater), or humidity is increasing at a rate of +5% per 30

minutes (or greater). If the arrow points downward, the temperature is

decreasing at a rate of -2°F per 30 minutes (or less), or humidity is decreasing

at a rate of -5% per 30 minutes (or less).

5. Console Operation

Note: The console has three buttons for easy operation: MIN/MAX/-

button, CLEAR/ADJUST button, and CHANNEL/+ button.

RH<45% RH45%~65% RH>65%

Dry

Comfortable

Wet