User manual

begin flashing. Press the + button to alternate the display between outdoor temperature, dew

point and wind chill.

Press the SET button to exit the SET mode.

5.3 Alarm Mode

5.3.1 Setting Alarms

To enter the Alarm mode from the normal mode, press (do not hold) the ALARM button. The

backlight turns on and the console beeps. The high alarm values and the HIAL icon will be

displayed. To set the low alarm values, press the ALARM button again and the LOAL icon will be

displayed. To exit the alarm mode, press the ALARM button again.

The following section outlines setting alarm values. The process is identical for high and low alarm

settings (depending on which alarm mode is displayed).

The high and low alarm modes can be exited at any time by either pressing the HISTORY button or

waiting for the 30-second time-out to take effect. You can skip over any setting by pressing the SET

button again.

Holding the + button or MIN/MAX button for two seconds will change the alarm setting values

rapidly.

Note: If an alarm has not been set, dashes (--.--) will be shown. If an alarm is enabled, the alarm

icon will be turned on.

5.3.1.1 Setting High Alarms

1. Set Alarm Hour. After entering the High Alarm Mode (reference Section 5.3.1), press the

SET button and the alarm time hour will begin flashing. Press the + button or MIN/MAX

button to change the alarm hour setting.

2. Set Alarm Minute. Press the SET button again and the alarm time minute will begin flashing.

Press the + button or MIN/MAX button to change the alarm minute setting.

To set the time alarm, press the ALARM button while the time is flashing, and the alarm icon

will turn on. To turn off the alarm, press the ALARM button again, and the alarm icon

will turn off.

3. Set High Wind Speed Alarm. Press the SET button again and the high wind speed alarm

will begin flashing. Press the + button or MIN/MAX button to change the wind speed alarm

setting.

To set the wind speed alarm, press the ALARM button while the wind speed is flashing, and

the alarm icon HI AL will be on. To turn off the alarm, press the ALARM button again,

and the alarm icon will turn off.

When the wind speed exceeds the alarm setting, the alarm will sound.