User manual

change the hour setting. The RCC time will override the manual set time.

5. Set Minute. Press the SET button to set the minute. Press the + button or MIN/MAX button

to change the minute setting. The RCC time will override the manual set time.

6. Set Date Format. Press the SET button to change the Month/Day format. Press the + button

to alternate the display between Month/Day (MD) and Day/Month (DM).

7. Set Year. Press the SET button to set the year. Press the + button or MIN/MAX button to

change the year setting. The RCC time will override the manual set date.

8. Set Month. Press the SET button to set the month. Press the + button or MIN/MAX button

to change the month setting. The RCC time will override the manual set date.

9. Set Day. Press the SET button to set the day of month. Press the + button or MIN/MAX

button to change the day setting. The RCC time will override the manual set date.

10. Wind Speed Units of measure. Press the SET button to set the wind speed units of measure.

Press the + button to alternate the display units between km/h, mph, m/s, knots, and bft (or

Beaufort scale).

11. Wind Direction Calibration. Press the SET button to calibrate the wind direction. Press

the + button to change the wind direction (in increments of 22.5 degrees, or 8 point wind

rose). Reference Section 4.3 for more information on calibrating the wind direction.

12. Rainfall Units of Measure. Press the SET button to set the rainfall units of measure. Press

the + button to alternate the display units between mm and inches.

13. Temperature Units of Measure. Press the SET button to set the temperature units of

measure. Press the + button to alternate the display units between °F and °C.

Press the SET button to exit the SET mode.

5.2 Quick Set Mode

To enter the Quick Set mode from the normal mode, press (do not hold) the SET button. The backlight

turns on and the console beeps. The Quick Set mode can be exited at any time by either pressing the

HISTORY button or waiting for the 30-second time-out to take effect. You can skip over any setting

by pressing the SET button again.

1. Wind Speed Average vs. Wind Speed Gust. After entering the Quick Set Mode, the wind

speed value will begin flashing. Press the + button to alternate the display between average

and gust.

2. Rain Increments. Press the SET button to set the rainfall increments. Press the + button to

alternate the display between 1 hour, 24 hour, week, month and total.

3. Resetting Total Rain. While the total rain is flashing (from the previous step), press and hold

the SET button for two seconds until the total rain reads 0 and the display beeps.

4. Outdoor Temperature, Dew Point and Wind Chill. Press the SET button to view alternate

temperature calculations (temperature, dew point and wind chill). The temperature will