User manual

6.4 Run EasyWeather

To run EasyWeather, in Windows, select Start -> All Programs -> Easy Weather.

Note: You may be prompted to run EasyWeather as the administrator (Vista and Windows7). To

perform this action, browse to the program files directory location using Windows explorer,

commonly located here:

C:\Program Files\EasyWeather

Right Click on the EasyWeather.exe icon, select the Compatibility Tab and under Privilege Level,

select Run as Administrator.

Failure to run the program as administrator may limit the graphical display mode capability, since

EasyWeather writes data to file locations deemed protected with strict Microsoft protection enabled.

Note: If you run the program for the first time, the current weather will be displayed and at the

bottom line of the window, and the program will show related information regarding reading historical

data into the PC.

When there is large amount of archived data to be uploaded, it may take a few minutes before the

system will respond to your requests. Otherwise, it will display the ―read weather data fail‖ error

message, since the USB port is reading the data from the memory and the system is not able to

respond to requests.

6.5 EasyWeather Features

The following section outlines the features available in the EasyWeather Software.

6.5.1 Main Display

When you launch HeavyWeather, the main display will be shown. The main display shows current

weather conditions, alarm settings and minimum and maximum data.