User manual

5.12 Memory

The console stores up to 4080 complete sets of weather data with associated time and date stamp. The

base station will lose all of the weather data if there a power interruption. In the event the memory is

full, the old data is overwritten by the new data.

Press the history key to review the historical data.

1. Select the down key to review historical data archived in the console. Select the up key to

advance historical data archived in the console (default is 30 minute intervals).

When history data displayed, the corresponding date and time will be displayed at the time

section area.

The historical archive interval can only be changed using the PC software that comes with

this product. The factory default archive interval is 30 minutes.

2. Clear Memory. Press the history key to clear memory. The memory fill icon will be flashing.

Press and hold enter key for 3 seconds to clear memory.

6. PC Software

Note: EasyWeather software is included with this weather station package. Easy Weather runs on

most PC operating systems. Cumulus is free internet publishing PC software application by

Sandaysoft. WeatherSnoop is a paid software and internet publishing application for Macs by

Tee-Boy.

For EasyWeather updates and alternate PC applications, visit:

http://ambientweather.wikispaces.com/ws2080

6.1 EasyWeather Overview

EasyWeather allows you to display real-time data, program the display console, set alarms, view and

export historical data and create graphs. Whereas the weather station console is limited to 4080

records, EasyWeather is only limited by your PC’s memory.

6.2 Connect PC Connection

Connect the weather station console to the PC using the included USB cable. The computer should

acknowledge the connection with a beep and the device installation notice will be displayed if

connected for the first time.

6.3 EasyWeather Software Installation

Insert the included CD into your hard drive and the software installer will automatically start. If it

does not, browse to My Computer (or Computer) in windows and locate the CD Drive. Right click on

this drive, select Explore and run Setup.exe.

The software will install to the program files directory.