User manual

5.10 Outdoor Temperature, Wind Chill and Dew Point

Figure 19

1. Outdoor Temperature, Wind chill and Dew Point. Press the up key or down key to

alternate the display between the outdoor temperature, wind chill and dew point.

2. Outdoor Temperature Units. Press the up key or down key to alternate the display unit

between °C and °F.

3. Outdoor Temperature High Alarm. Press the enter key to set the outdoor temperature high

alarm function. The outdoor temperature and HI AL (high alarm) will begin flashing.

Press the up key or down key to change the value.

Press the ON/OFF key to select the alarm on or off (if the alarm is enabled, the alarm icon

will be turned on).

4. Outdoor Temperature Low Alarm. Press the enter key to set the outdoor temperature low

alarm function. The outdoor temperature and LO AL (high alarm) will begin flashing.

Press the up key or down key to change the value.

Press the ON/OFF key to select the alarm on or off (if the alarm is enabled, the alarm icon

will be turned on).

6. Outdoor Temperature Record High. Press the enter key to display maximum outdoor

temperature record since the last reset. The maximum temperature record and MAX icon (in

the tendency section) will begin flashing. To reset, press the enter key for 3 seconds, and the

maximum value (and associated date and time) (and associated date and time) will be reset to

current reading.

7. Outdoor Temperature Record Low. Press the enter key to display minimum outdoor

temperature record since the last reset. The minimum temperature record and MIN icon (in

the tendency section) will begin flashing. To reset, press the enter key for 3 seconds, and the

minimum value (and associated date and time) will be reset to current reading.

8. Repeat the above steps for wind chill and dew point.

5.11 Outdoor Humidity

Please reference Section Indoor Humidity. The outdoor procedure is similar to the indoor humidity

procedure.