Manualshelf

User manual

ManualsBrandsAmbient Weather ManualsHousehold AppliancesWS-2080A
21222324252627282930
Version 1.5 ©Copyright 2010, Ambient LLC. All Rights Reserved. Page 23
the tendency section) will begin flashing. To reset, press the enter key for 3 seconds, and the
maximum value (and associated date and time) (and associated date and time) will be reset to
current reading.
6. Indoor Temperature Record Low. Press the enter key to display minimum indoor
temperature record since the last reset. The minimum temperature record and MIN icon (in
the tendency section) will begin flashing. To reset, press the enter key for 3 seconds, and the
minimum value (and associated date and time) will be reset to current reading.
5.9 Indoor Humidity
Press the menu key to enter the INDOOR HUMIDITY Set Mode. You can skip over any setting by
selecting the enter key.
Figure 18
1. Indoor Humidity High Alarm. Press the enter key to set the indoor humidity high alarm
function. The indoor humidity and HI AL (high alarm) will begin flashing.
Press the up key or down key to change the value.
Press the ON/OFF key to select the alarm on or off (if the alarm is enabled, the alarm icon
will be turned on).
2. Indoor Humidity Low Alarm. Press the enter key to set the indoor humidity low alarm
function. The indoor humidity and LO AL (high alarm) will begin flashing.
3.
Press the up key or down key to change the value.
Press the ON/OFF key to select the alarm on or off (if the alarm is enabled, the alarm icon
will be turned on).
4. Indoor Humidity Record High. Press the enter key to display maximum indoor humidity
record since the last reset. The maximum humidity record and MAX icon (in the tendency
section) will begin flashing. To reset, press the enter key for 3 seconds, and the maximum
value (and associated date and time) (and associated date and time) will be reset to current
reading.
5. Indoor Humidity Record Low. Press the enter key to display minimum indoor humidity
record since the last reset. The minimum humidity record and MIN icon (in the tendency
section) will begin flashing. To reset, press the enter key for 3 seconds, and the minimum
value (and associated date and time) will be reset to current reading.