User manual

1. Change Tendency. Press the up key or down key to alternate the display between SUNNY,

PARTLY CLOUDY and CLOUDY, and RAINY.

2. Pressure Threshold. Press the enter key to change the pressure threshold. The up and down

arrow and pressure tendency will be flashing. Press the up key or down key to adjust the

pressure threshold from 2.0 to 4.0 hPa/hr (the default is 2 hPa/hr).

3. Storm Threshold. Press the enter key to change the storm threshold. The up and down arrow

and pressure tendency will be flashing. Press the up key or down key to adjust the pressure

threshold from 3.0 to 9.0 hPa/hr (the default is 4 hPa/hr).

5.8 Indoor Temperature

Press the menu key to enter the INDOOR TEMPERATURE Set Mode. You can skip over any setting

by selecting the enter key.

Figure 17

1. Indoor Temperature Units. Press the up key or down key to alternate the display unit

between °C and °F.

2. Indoor Temperature High Alarm. Press the enter key to set the indoor temperature high

alarm function. The indoor temperature and HI AL (high alarm) will begin flashing.

Press the up key or down key to change the value.

Press the ON/OFF key to select the alarm on or off (if the alarm is enabled, the alarm icon

will be turned on).

3. Indoor Temperature Low Alarm. Press the enter key to set the indoor temperature low

alarm function. The indoor temperature and LO AL (high alarm) will begin flashing.

Press the up key or down key to change the value.

Press the ON/OFF key to select the alarm on or off (if the alarm is enabled, the alarm icon

will be turned on).

5. Indoor Temperature Record High. Press the enter key to display maximum indoor

temperature record since the last reset. The maximum temperature record and MAX icon (in