User manual

Connect the wind speed cable to the wind direction phone jack, as shown in

Figure 7. Connect the wind direction cable to the thermo-hygrometer phone jack (reference the label

on the thermo-hygrometer). Connect the rain gauge cable to the thermo-hygrometer phone jack

(reference the label on the thermo-hygrometer).

Figure 7

Insert two AA batteries in the thermo-hygrometer, as shown in Figure 8. The transmitter LED will

light up momentarily (4 seconds), and then flash once every 48 seconds for each transmission update.

Note: Do not install the batteries backwards. You can permanently damage the

thermo-hygrometer. Do not use rechargeable batteries.

Note: We recommend installing Lithium AA batteries:

http://www.ambientweather.com/enaaliba4pa.html

Lithium batteries provide longer life and operate in colder temperatures.