User manual

However, since it is dynamic, you will have to determine the address that was assigned to the unit.

To determine this address, download a free IP scan tool here:

Hhttp://www.advanced-ip-scanner.com

For Mac and Linux users, visit:

HTUhttp://www.angryip.org/w/DownloadUT

Select the Scan button in the software. After the scan is complete, locate the IP address associated

with the Mac Address of the MeteoBridge. The prefix will begin with one of the following:

90:F6:52:xx:xx

A0:F3:C1:xx:xx

Figure 7

In the example above, type http://192.168.0.33 into your browser to begin communicating to the

MeteoBridge.

4.3 Reading the Blinks from the Status/Reset Light (alternate

IP finder)

To read the IP address from the Status/Reset light, wait for the Status/Reset LED to stop blinking

(when booting up, it will blink slowly, then quickly, then solid on). This process may take several

minutes.

Press the Status/Reset button, then immediately let go to begin. It is helpful to have a paper and pen