User manual

Version 1.0 ©Copyright 2013, Ambient LLC. All Rights Reserved. Page 6
Figure 5
1. Channel 1 Indicator
2. Reception Icon (solid when searching,
flashes when updating)
3. Channel Selector
4. Channel 1 Temperature
5. Temperature units (°F or °C)
6. Max Temperature Indicator
7. Temperature Alarm
8. Maximum Temperature, Channel 1
9. Minimum Temperature, Channel 1
10. Maximum Temperature, Channel 2
11. Minimum Temperature, Channel 2
12. Maximum Temperature, Channels
3,4,5,6,7,8, indictor
13. Low battery indicator
14. Minimum Temperature, 3,4,5,6,7,8, indictor
15. Min Temperature Indicator
16. Indoor Temperature Indicator
17. Temperature, Channels 3,4,5,6,7,8,
18. Scroll mode indicator
19. Channel indicator
20. Low battery indicator
21. Channel 2 Temperature
22. Channel 2 Indicator
23. Low battery indicator
2.2.2 Sensor Operation Verification
Verify the temperature sensors match closely with the console and sensor array in the same location
(about 5 to 10’ apart). The sensors should be within 2°F (the accuracy is ± 1°F). Allow about 30
minutes for both sensors to stabilize. The temperature can be adjusted or calibrated later to match each
other or a known source.
3 Remote Sensor Installation
The remote probe sensors have many applications, including measuring inside/outside air temperature,
water temperature, soil or ground temperature and refrigerator / freezer temperatures.