User Manual

Model: SP3000T
Revision P1A/01102013
USER MANUAL
SmartPoint SP3000T
The internal temperature sensor is best-in-class with regards to energy
consumption and enables long-term battery-operated usage.
3. Long Range
The SP3000T has a combined Power Amplifier (PA) & Low Noise Amplifier
(LNA) offering maximum radio range.
4. Easy Installation
Due to the fact that the SP3000T is powered by an internal battery, it can be
configured and installed within minutes.
5. Automated Logging & Flushing
2
The SP3000T has a 2MB internal Flash that is used to store up to 8K data
samples. In case of temporary connection loss, the SP3000T will log its sensor
readings and flush them fully automated once a connection is re-established,
offering a high degree of redundancy and reliability.
1.3 Conventions
This user manual uses the following typographical conventions to mark certain
portions of text: new terms, foreign phrases, and other important passages are
emphasized in italics .
Everything that represents input or output of the computer, in particular commands,
program code, and screen output, is shown in a mono-spaced font and separated
by borders. Within such passages, italics (example) indicate place-holders; you must
insert an actual value instead of the place-holder. On occasion, parts of program
2 Logging & Flushing is NOT enabled by default.
Ambient Systems B.V.
Page 5 of 19
Colosseum 15D • 7521 PV Enschede • The Netherlands
T: [phone] • F: [phone] • www.ambient-systems.net
KvK: 08122911 • VAT NL: 81297625381
CHECK.TRACK.TRACE.