User guide

32
Control (UI) Default Value Function
name none The name used by the RenderOutputDefine node for these
output channel settings.
This parameter usually matches the channel name. By allowing
a different name to be sent to the RenderOutputDefine node
different filter and file types can be used for the same output
variable.
driver
driver driver_exr Sets the output channel driver to use. The controls available
under driverParameters are dependent on the driver
selected:
• driver_deepexr
• driver_display
• driver_exr
• driver_jpeg
• driver_png
• driver_tiff
> Browse...
N/A Brings up the file browser or your studio's asset management
browser and enables you to select the driver to use.
ArnoldOutputChannelDefine parameters (Cont.)
channel RGBA Sets the output channel.
type RGBA Sets the output channel type:
BYTE, INT, LONG, BOOL, FLOAT, DOUBLE, RGB, RGBA, ABSRGB,
VECTOR, POINT, POINT2, STRING, POINTER, ARRAY, MATRIX,
and ENUM
2 NODES A-C | ARNOLDOUTPUTCHANNELDEFINE