User guide

305
Control (UI) Default Value Function
Action none Searches the Scene Graph for lights and constraints brought in
by LookFiles then enables or disables the results as required.
LookFileManager
LookFileManager decodes incoming LookFiles that have been set up in another scene. Each LookFile piece of
imported geometry passed into this node must be assigned through a LookFileAssign node. Once the LookFile is
assigned, LookFileManager decodes the LookFile into the passes set up by the look development artist using a
LookFileBake node.
Control (UI) Default Value Function
Look Files none Lists the LookFiles that are being edited by the
LookFileManager.
Passes default Lists any passes associated with the LookFiles.
Add Override none Allows you to add overrides to selected LookFiles.
LookFileMaterialsIn
This node loads materials from a LookFile into the local scene to allow additional edits before they are applied to the
scene.
Control (UI) Default Value Function
lookfile none Sets the LookFile path and name.
passName none Sets the pass name to use from the LookFile.
asReference No When set to Yes, the material is loaded as a reference.
Reading the material by reference causes any materials assigned
to keep a reference to the Katana LookFile from which they got
their material.
5 NODES L-Q | LOOKFILEMANAGER