User guide

290
Control (UI) Default Value Function
left -1 This set of four number parameters controls the screen window
placement on the imaging plane. They are, in order, left, right,
bottom and top bounds of the screen window.
right 1
bottom -1
top 1
centerOfInterest 20 Offsets the center of interest of the light.
orthographicWidth 30 Sets the orthographic projection width.
includeInCameraList Yes When enabled, the light is visible in the Camera List.
radius 1 Sets the light's radius.
previewColor
previewColor 1, 1, 1 Specifies the color of the light in the Viewer. This value does not
affect the color value of the light when rendering, it's used for
testing the placement of lights.
previewColor > RGB
red 1 Sets the red value of the fade color.
green 1 Sets the green value of the fade color.
blue 1 Sets the blue value of the fade color.
previewColor > HSL
hue 0 Sets the hue of the fade color.
saturation 0 Sets the saturation of the fade color.
lightness 1 Sets the lightness of the fade color.
previewColor > HSV
hue 0 Sets the hue of the fade color.
saturation 0 Sets the saturation of the fade color.
value 1 Sets the value of the fade color.
5 NODES L-Q |