User guide

248
Control (UI) Default Value Function
channel A The channel from out_mask input to use as a mask:
• R - use the red channel as the mask.
• G - use the green channel as the mask.
• B - use the blue channel as the mask.
• A - use the alpha channel as the mask.
By default, the reformat effect is limited to the non-black
areas of the mask.
invert disabled Inverts the use of the mask channel so that the reformat
effect is limited to the non-white areas of the mask.
fringe disabled When enabled, the mask is modified so that by default the
reformat effect is limited to the fringe (semi-transparent
areas).
resolution
[resolution] Dependent on Project
Settings
The format to which you want to output the image sequence.
The default setting resizes the image to the format indicated in
the Project Settings.
width globals.width Sets a custom reformat width.
Note: You can only edit this field when the initial resolution is
modified.
height globals.height Sets a custom reformat height.
Note: You can only edit this field when the initial resolution is
modified.
preserveAspect enabled When enabled, Katana preserves the input image's aspect
ratio.
preserveAspect: enabled
center enabled When enabled, Katana pads the output image if any gaps
remain after reformatting while preserving the original aspect
ratio.
4 NODES I-K | IMAGEREFORMAT