User guide

179
Control (UI) Default Value Function
units F-Stops Select the units in which the exposure is altered:
• F-Stops - use the fsColor controls to adjust exposure.
• Gain - use the gColor controls to adjust exposure.
ImageFade
This node fades the input image to a color of your choosing. By default, the image is faded to black.
Control (UI) Default Value Function
R enabled When enabled, affect the red channel of the image.
G enabled When enabled, affect the green channel of the image.
B enabled When enabled, affect the blue channel of the image.
A enabled When enabled, affect the alpha channel of the image.
mix 1 Dissolves between the original image at 0 and the full fade
effect at 1.
Mask
channel A The channel from out_mask input to use as a mask:
• R - use the red channel as the mask.
• G - use the green channel as the mask.
• B - use the blue channel as the mask.
• A - use the alpha channel as the mask.
By default, the fade effect is limited to the non-black areas of
the mask.
invert disabled Inverts the use of the mask channel so that the fade effect is
limited to the non-white areas of the mask.
4 NODES I-K | IMAGEFADE