User guide

156
Control (UI) Default Value Function
red 16 Sets the maximum values at which the rgba channels are
clamped.
green 16
blue 16
alpha 1
inputs Unpremultiplied Select whether you are using a premultiplied or unpremultiplied
input image:
• Premultiplied - the ImageClamp node unpremultiplies the
input, applies the clamp effect, and premultiplies the input
again. This simulates applying the clamp before the
premultiplication was done, as color corrections are typically
applied on unpremultiplied images.
• Unpremultiplied - the ImageClamp node simply applies the
contrast change.
ImageColor
Generates an image where every pixel is the same color. By default, the image is white.
Control (UI) Default Value Function
bounds
[resolution] Dependent on Project
Settings
Select the size of the image.
left 0 Lets you offset the image by adding this number of pixels to the
left side of the image.
bottom 0 Lets you offset the image by adding this number of pixels below
the image.
width globals.width The width of the image in pixels.
The default setting, globals.width, resizes the image to the
width of the resolution indicated on the Project Settings tab.
4 NODES I-K | IMAGECOLOR