User guide

121
Control (UI) Default Value Function
rotationOrder XYZ Sets the order in which rotation is applied:
• XYZ
• XZY
• YXZ
• YZX
• ZXY
• ZYX
interface: SRT Values
translate 0.0, 0.0, 0.0 Controls rig translation on the xyz axes.
rotate 0.0, 0.0, 0.0 Controls rig rotation on the xyz axes.
scale 1.0, 1.0, 1.0 Controls rig scale on the xyz axes.
interface: Transform Matrix
matrix 1.0, 0.0, 0.0, 0.0, 0.0,
1.0, 1.0, 0.0, 0.0, 0.0,
0.0, 1.0, 1.0, 0.0, 0.0,
0.0, 0.0, 1.0
Controls transformations using a matrix in place of individual SRT
controls.
enable point
constraint
disabled When enabled, specify aim constraint options.
enable point constraint: enabled
targetPath N/As Specifies the object or objects to constrain to. If you want to aim
a rig to point at a target, this would be the target. If you set
multiple targets, then the constraint aims at the average center
of the objects.
allowMissingTargets No When set to Yes, silently ignore the constraint if its target is not
in the Scene Graph.
When set to No, produce an error on constraint resolution if the
target is missing.
3 NODES D-H | GAFFERTHREE