User guide

100
Control (UI) Default Value Function
fit Best Controls how the image file fits into the image plane if there
is a mismatch between aspect ratios:
• Fill - the image is scaled as required to fill the plane, without
being squashed or stretched. Any excess is cropped.
• Best - the image is scaled as required to display it entirely
within the plane, without being squashed, stretched or
cropped.
• Horizontal - the image is scaled as required so that its
aspect ratio is maintained within the horizontal bounds of
the plane. Any excess at the top or bottom is cropped.
• Vertical - the image is scaled as required so that its aspect
ratio is maintained within the vertical bounds of the plane.
Any excess at the left or right is cropped.
• To Size - the image is stretched or squashed to fit with the
plane both horizontally and vertically.
Note: To control the image's SRT values directly, enable the
manualPlacementSettings checkbox.
crop
left 0 Sets the amount of manual crop to apply to the edges of the
image plane.
bottom 0
right 1
top 1
manualPlacementSettings No When set to Yes, you can adjust the image manually using its
SRT values.
manualPlacementSettings: Yes > size
x 1
y 1
manualPlacementSettings: Yes > offset
x 0
2 NODES A-C | CAMERAIMAGEPLANECREATE