10th Generation

To change your Wi-Fi password in the future, perform the Wi-Fi setup process again from your
Kindle. Once reconnected to your Wi-Fi network, your updated Wi-Fi password will be automatically
saved to Amazon (if you have not opted out of this feature).
To delete any Wi-Fi passwords that you have saved from this device:
1. Tap the Quick Actions icon on the toolbar, then tap All Settings.
2. On the Settings page, tap Wi-Fi & Bluetooth, then Delete Wi-Fi Passwords.
3. Tap Delete to confirm.
Airplane Mode
Airplane Mode disables wireless connectivity, including cellular, Wi-Fi, and Bluetooth. To turn on
Airplane Mode, tap the Quick Actions icon on the toolbar, then tap Airplane Mode. The Airplane
Mode status indicator will display at the top of the Home screen. To view it within a book
or document, tap the top of the screen to display the toolbars. You can also access the Airplane
Mode setting by tapping the Quick Actions icon on the toolbar, then tapping All Settings. On
the Settings page, tap Wi-Fi & Bluetooth. Any periodical downloads or other pending updates that
require a wireless connection will occur the next time you turn it back on.
VoiceView screen reader
The VoiceView screen reader enables you to navigate your Kindle using special gestures, receive
voice guidance when you interact with items on the screen, and listen to millions of books. You can
pair a Bluetooth audio device for use with the VoiceView screen reader when setting up your Kindle.
Please read all instructions before starting setup, then reference them as needed. There will be no
audio announcement or feedback until the last step.
1. Press the Power button once to turn on your Kindle. The Power button is located on the
top edge of the device and the micro-USB/power port is located on the bottom edge of
the device.
2. Wait 45 seconds.
3. Put your Bluetooth audio device into pairing mode.
4. Press and hold the Power button for 9 seconds.
5. Hold two fingers spaced apart on the screen for 1 second, then wait up to 2 minutes to
hear audio.
6. When you hear audio from your Bluetooth device, hold two fingers spaced apart on the
screen.
Troubleshooting: If you do not hear audio from your Bluetooth device within 2 minutes of completing
step 5, confirm your Bluetooth audio device is in pairing mode and repeat steps 4 and 5.
Once your audio device is connected and VoiceView is enabled for the first time, the VoiceView
tutorial will begin. You will also be prompted to complete setup, including connecting to a wireless
network and registering your Kindle.
To turn on VoiceView after setup, first make sure your Bluetooth audio device is on before waking
your Kindle from suspend using the Power button. Next, hold down the Kindle Power button for 9
seconds, then hold two fingers on the screen. VoiceView audio will resume after 6 seconds. You can
also turn VoiceView on and off in Settings. To manage VoiceView screen reader settings, tap the
Quick Actions icon on the toolbar, then tap All Settings. On the Settings page, tap Accessibility.
If VoiceView is currently enabled the All Settings option in Quick Actions will change to be VoiceView
Settings.
Kindle Oasis User’s Guide
Chapter 1 Getting Started 10