Specifications

RUNNING COMSOL MULTIPHYSICS® WITH AMAZON™ ELASTIC COMPUTE CLOUD™ | 19
6 Paste the command that you copied in step 4 into the command prompt window
and press Enter.
7 If asked, Store key in cache? type y and press Enter.
8 Leave the window open until you are finished with your computations. Your ports
are only forwarded as long as the SSH session is active, and closing the command
prompt will deactivate the session.
You are now ready to connect to the server you have created in the cloud.
1 Open COMSOL Multiphysics 5.0.
2 Click File.
3 Navigate to Client Server>Connect to Server.
4 In the field Server, write localhost.
5 Write the username and password that you used when creating your login.properties
file.
6 Click OK.
7 You are now connected to the server. If you should get an error message, please refer
to the Troubleshooting section at the end of this guide.
You can now use COMSOL as you normally would with the added power of the cloud,
while working as if you were using your local computer.
Disconnect from the COMSOL Multiphysics
®
Server
To disconnect from the COMSOL Multiphysics server, follow the steps described
below:
1 Click File.
2 Navigate to Client Server and click Disconnect from Server.
3 Choose if you want to save the changes made to your model or not.
You have now disconnected from the server.
Shut Down and Delete Your Stacks
In this section you will learn how to remove the instances you have created.
When you are done with your computations you will need to shut down in order to
avoid unnecessary costs. The servers that you have created can also be deleted all at