User's Manual

智莱科技 Shenzhen Zhilai Sci and Tech Co., Ltd.
文件名称：USA023 项目 23 门蓝牙柜_产品使用说明书
File name: User’s Manual for Odin Locker
版本 version：V3.1
文件编号：ZL-ZL-110480
File No: ZL-ZL-110480
页数 pages：31
- 16 -
十字螺丝刀在柜子外部侧面安装螺丝固定，将取下的垫片及螺母安装在固定块上，再使用活动扳
手将螺母和膨胀螺丝拧紧。
以下是安装的图片，可供参考：
Place the anchor wall bracket on the locker side and align it with the hole. Mark the position of the
installation hole at the bottom of the wall bracket, drill the marked position on the ground, hammer
the expansion screw into the hole, and remove the washer and nut on the expansion screw. Fix the wall
bracket on the locker side with reference to the installation position, install the accessories of the wall
bracket inside the bottom slots with reference to the installation hole, use a cross screwdriver to install
the screws on the outer side of the locker, and install the removed washer and nut on the wall bracket ,
And then use an adjustable wrench to tighten the nut and expansion screw.
The following is the installation figure for reference: