User's Manual

智莱科技 Shenzhen Zhilai Sci and Tech Co., Ltd.
文件名称：USA023 项目 23 门蓝牙柜_产品使用说明书
File name: User’s Manual for Odin Locker
版本 version：V3.1
文件编号：ZL-ZL-110480
File No: ZL-ZL-110480
页数 pages：31
- 14 -
使用记号笔标记背面固定块的靠墙安装孔位，如下图所示。挪开柜子后，使用电钻对标记位置
进行打孔，使用锤子将膨胀螺丝打入孔中，并取出膨胀螺丝上的垫片及螺母。将整柜挪至安装位置，
膨胀螺丝穿过安装孔，使用活动扳手将取下的垫片及螺母安装上去。
Mark the installation holes of the rear wall bracket by marker, as shown in the figure below. After
removing the locker, drill the marked position, hammer the expansion screw into the hole, and remove
the washer and nut on the expansion screw. Move the whole locker to the installation position, pass the
expansion screw through the hole, and install the removed washer and nut with the adjustable wrench.
将固定块 1 拆下，使用活动扳手将取下的垫片及螺母安装到墙面上，如下图所示：
Remove the wall bracket 1, and install the removed washer and nut on the wall with the
adjustable wrench, as shown in the figure below:
rear wall bracket