User's Manual

智莱科技 Shenzhen Zhilai Sci and Tech Co., Ltd.
文件名称：USA023 项目 23 门蓝牙柜_产品使用说明书
File name: User’s Manual for Odin Locker
版本 version：V3.1
文件编号：ZL-ZL-110480
File No: ZL-ZL-110480
页数 pages：31
- 12 -
2) 调整地脚 Anchor Adjustment
使用三角螺丝刀取下小应急盖板锁上的挡片，将小应急盖板打开取出，将大应急盖板向上推
取出后，打开最下方两个格口。
Use a triangular screwdriver to remove the locking piece of the small front cover. Open the small
front cover and take it out, push the large front cover up and take it out, and then open the bottom two
slots.
用准备好的地脚扳手通过下图位置（最底下两个格口内部）调节主柜底部的地脚螺母，使前
后水平；将水平仪放置在柜门上及柜顶上，调节地脚使 2 个水平仪的气泡在正中间。
Use the prepared anchor wrench to adjust the anchor nut at the bottom of the starter according to
the position shown in the figure below (inside the bottom two slots) to keep the front and back level.
Place the levelling instrument on the locker door and the locker top, and adjust the anchor so that the
bubbles of the two levelling instruments are in the middle.