User's Manual

智莱科技 Shenzhen Zhilai Sci and Tech Co., Ltd.
文件名称：USA023 项目 23 门蓝牙柜_产品使用说明书
File name: User’s Manual for Odin Locker
版本 version：V3.1
文件编号：ZL-ZL-110480
File No: ZL-ZL-110480
页数 pages：31
- 11 -
cross screwdriver
to fix the screws of accessories
5
活动扳手
adjustable wrench
用于拧螺母
to tighten the nut
6
美工刀
utility knife
用于拆卸内部包装（纸皮和包装膜）
to remove internal packages (paper and packaging film)
7
三角螺丝刀
triangular screwdriver
用于接地线、安装电源、过线孔封堵
to block the earth wire, power supply and cable-runs entrance
8
水平尺
levelling instrument
用于测试柜子安装是否水平
to test whether the locker keeps level
9
锤子
hammer
用于安装膨胀螺丝
to fix the expansion screw
10
记号笔
marker
用于标记固定块安装孔位
to mark the installation hole position of the wall bracket
安装步骤 installation steps：
1) 拆卸包装 Unpacking
使用尖嘴钳将包装钢带拆卸掉，再使用美工刀将纸皮和气泡膜小心割开拆除。拆钢带时请注
意将需要剪断位置的两端抓住，防止钢带剪断后弹起造成误伤，请佩戴手套进行操作。
First remove the outer packaging steel strip with the needle-nosed pliers, and carefully cut off the
paper and bubble film with a utility knife. Grab the two ends of the position where you need to cut to
prevent injury when disassembling the steel strip. Please wear gloves to operate.