User Manual

9
EN
• Look into the right eyepiece (A), rotate the diopter adjustment (B) until
the image is clear.
• Look into both eyepieces (A), move around the adjustable eyepiece
housing (C) until the two images merge into one.
• Rotate the objective (E) to the higher magnification power. Re-adjust
the focus using the focus knob (N) and the diopter adjustment (B) if
needed.
• After using the microscope, remove the slide/specimen from the
stage plate (G/Q).
• Switch off (M) and disconnect the adaptor (S) from the socket outlet.
• Clean the work area and dispose of the used specimens.
Cleaning and Maintenance
WARNING
Risk of damage! During cleaning do not immerse the
product in water or other liquids. Never hold the product under running
water.
Cleaning
• To clean the lenses (A, E), only use lens cleaning tissues. Do not use
cloth, paper or hands.
• To clean the product, wipe with a soft, slightly moist cloth.
• Never use corrosive detergents, wire brushes, abrasive scourers,
metal or sharp utensils to clean the product.
Maintenance
• After each use, place the dust cover (R) on the microscope. Place the
accessories back into their respective plastic bags to prevent dust
from collecting.
• Slight greasing or putting oil may be needed for the mechanical
moving parts. Apply the appropriate oil discreetly.