User Manual

8
EN
• Place the eyepieces (A) into the adjustable eyepiece housing (C).
NOTICE
There is an option to secure the eyepieces (A), tighten
the screw on the side of the adjustable eyepiece housing (C) to lock the
eyepieces (A) in place.
P
J
B
N
E
• Attach the eye cups (P) onto the eyepieces (A).
• Remove the cover of the objective (E).
• Rotate the objective (E) to the lowest magnification power setting.
NOTICE
Start with the lowest magnification power every time a new
specimen is placed on a stage plate (G/Q). Most observations are made
at low magnification power.
• Place a slide, a small object or a petri-dish holding a specimen (not
included) onto the stage plate (G/Q). Secure the slide or specimen
with the stage clips (O) if needed.
• Turn the height adjustment knob (J) to adjust the height of the head
(D) to an estimated viewing distance.
• Look into the left eyepiece (A), rotate the focus knob (N) slowly until
the image is clear. Adjust the position of the slide/specimen if needed.