Welcome Guide ® English Contents: Before getting started, ensure the package contains the following components: Oo x1 Feast— 25/16" (@ 8mm) IMPORTANT SAFEGUARDS Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.
Espalier Franglais Before First Use # Check for transport damages. STATESMEN Risk of suffocation! Keep any packaging materials away from children — these materials are a potential source of danger, e.g. suffocation. Mounting on a wall Step 1: in {236.4 cm) for BO7LSD41KQ in (192.1 cm) for BO7LSLLKIV * Mark the installation holes with a pencil. Ensure the holes are level. + Alternatively, place the product against the wall and mark the installation holes through the keyholes.
Mounting on a Wall Step 2: » Drill 2 holes at the marked positions. steps: Insert 2 wall plugs (B} into the holes.
Espalier Franglais Mounting on a Wall Step 4: 2 . “tro 1.97 In 6 mm) A504 * Fix 2 screws (C) into the wall plugs, leaving 1.87 the screw protruding from the wall. | steps: * Attach the cord (D) to the handle.
Mounting on a Wall Step 6: * Mount the product onto the screws (C). m © | step: Carefully pull the screen straight down at an 90° angle and guide the screen slowly back until it locks in position.
Espalier Franglais | Ceiling hanging option Chain {not included) Snap link {not included) ; D-ring * The product can be also installed on a ceiling using chains/snap links or similar fixing means (not included). * Fold out the D-ring on each end cap. = Attach a chain to each D-ring using a snap link. | Retracting the screen * To retract the screen, pull the screen down more than 2 in (5 cm). * Guide the screen back up into the enclosure without releasing the handle or cord.
Cleaning and Maintenance Screen Cleaning * To clean light dust and dirt, wipe with a lint-free, slightly moist cloth dipped in wan water. » Lightly wipe in an upwards-downwards motion, starting from the left of the screen and moving to the right. + Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product. * Use a dry lint-free cloth to wipe off any excess water from the screen.
