User Manual

7
EN
• A separate tin or bucket should be used for the disposal of specimen
samples and dyes. Any wasted solution should be poured directly
down a drain, but never into a sink basin.
• Dispose of used specimen samples a household trash immediately
after use.
• Do not discard any equipment into the fire to avoid violent
combustion or explosion.
• If the product has to be moved, carry with one hand holding the
product at the arm and another hand supporting it at the base.
• Examine the set regularly for potentially unsafe conditions, such as
damaged housing, or parts. In the event of such damage, the set
should not be used until it is properly repaired.
• Store the set in its original packaging out of reach of children and
animals.
Grounding Instructions
This product must be grounded while in use to protect the operator
from electrical shock. The appliance is equipped with a 3-conductor
cord and a 3-prong grounding-type plug to fit the proper grounding-type
receptacle. The appliance has a plug that looks like sketch A in the figure
below. An adapter, sketch B, should be used for connecting sketch-A
plugs to two-prong receptacles. The grounding tab which extends
from the adapter must be connected to a permanent ground such as a
properly grounded outlet box as shown in sketch C using a metal screw.
Grounding prong
Circuit grounding conductor
connected properly
Metal
mounting
screw
Cover of grounded outlet box
Adapter
Grounding means
A
B
C