User Manual

9
EN
• Look into the eyepiece (R/S), rotate the fine focus knob (N) slowly
until the image is clear. Adjust the position of the slide if needed.
NOTICE
During observation, there is an option to rotate the
diaphragm (F) to further focus the light into the image.
• Rotate the nose piece (A) to the next objective lens, increasing in
magnification power. Re-adjust the focus using the fine focus knob
(N) if needed.
• After using the microscope, remove the slide from the stage (E), take
off the eyepiece (R/S) and place the eyepiece cover (I) on.
• Switch off (Q) and disconnect the adapter (T) from the socket outlet.
• Clean the work area and dispose of the used specimens.
Cleaning and Maintenance
WARNING
Risk of damage! During cleaning do not immerse the
product in water or other liquids. Never hold the product under running
water.
Cleaning
S40/0.65
160/0.17
4/0.10
160/0.17
6
S40/0.65
160/0.17
4/0.10
160/0.17
6
• To clean the lenses (R, S, B, C, D), only use lens cleaning tissues. Do
not use cloth, paper or hands. Rotate the objective lenses (B, C, D)
counter-clockwise to remove them from the nose piece (A).
• To clean the product, wipe with a soft, slightly moist cloth.
• Never use corrosive detergents, wire brushes, abrasive scourers,
metal or sharp utensils to clean the product.