User Manual

8
EN
Observing through the microscope
• Remove the cover (I) of the eyepiece holder (J).
• Place an eyepiece (R/S) into the holder (J).
• Turn the coarse focus knob (M) to adjust the height of the stage (E) to
the lowest position.
• Look into the eyepiece (R/S), adjust the brightness of the lamp (G)
using the brightness adjustment wheel (O).
• Rotate the nose piece (A) to the lowest magnification power setting.
NOTICE
Start with the lowest magnification power every time a
new slide is placed on the stage (E). Most observations are made at low
magnification power.
7
8
20
40
60
S40
160
7
8
20
40
60
S40
160
L
M
E
• Clip a slide (not included) onto the stage (E), securing with the stage
clips (L).
• Without looking into the eyepiece (R/S), turn the coarse focus knob
(M) until the objective lens is close to the slide. The objective lens
should not touch the slide.