User Manual

6
EN
Operation
Filling the water tank
CAUTION
Risk of electric shock! Disconnect the product from the
power supply before removing the water tank (G).
CAUTION
Risk of electric shock! Do not exceed the maximum
tank capacity.
• Lift the water tank (G) from the main base. Invert the water tank.
• Rotate the tank cap (J) counter-clockwise to open the water tank (G).
1 2
G
J
• Fill the water tank (G) with cool, distilled water.
CAUTION
Risk of damage! Do not fill water through the mist
nozzle (H) and scented air outlet (N). This will damage the product.
• Place the tank cap (J) on the water tank (G) and rotate it clockwise to
close the tank.
• Wipe the water tank (G) dry and place it back on the main body.
NOTICE
If the water level is too low, the product goes to ‘Mist off’ and
the light (L) flashes red. Refill the water tank (G).
Switching the humidifier on/off
The mist nozzle (H) controls the direction which the steam is
being released. Rotate the the nozzle (H) to adjust the mist
direction.
• Connect the product to the power supply. The light (L) switches on blue.
• To toggle mist function on/off, shift the control knob (A) to the desired
setting ( or 24H or 12H).
• To switch off, unplug the power cord (K) from the power outlet.