User Manual

8
Cleaning the drip container (L) and the drip tray (K)
• Empty the drip container (L) after each use.
• Clean the drip container (L) and the drip tray (K) with warm, soapy water and rinse.
• Dry the parts after cleaning.
Cleaning the product’s housing
• Wipe the product with a soft, slightly moist cloth.
• Dry the product after cleaning.
Internal cleaning
• Fill the water tank (B) with cold water to the MAX level indicator.
• Cover the water tank (B) with the water tank lid (A).
• Place a large cup on the drip tray (K).
• Plug in the product to the wall outlet.
• Press the large cup button (G) to start the cleaning cycle. The large cup button (G)
starts flashing.
• After the cleaning cycle is finished, the large cup button (G) stops flashing.
CAUTION
Risk of burns! Do not remove the cup from the drip tray (K) before
the cleaning is complete. Do not open the locking latch (I) and the
brew chamber (C) for 5 minutes after operation.
Descaling
NOTICE
Descale the product after every 3 months of regular use.
• Fill the water tank (B) to the MIN indicator with a 5-15% vinegar solution.
• Place a large cup on the drip tray (K).
• Press the POWER button (H).
• Press the large cup button (G). The large cup button (G) starts flashing.
• When the brew spout (D) starts pouring out the liquid, press the
POWER button (H) again to switch the product off.
• After 30 minutes, perform the internal cleaning process (see “Internal cleaning”)
3 times to remove the vinegar solution residues from the product.
Storage
• Clean and dry all parts before storage.
• Store the product in an upright position in a dry place, away from children.
Trademarks
The K-Cup
®
term is trademarked by Keurig Green Mountain.