User Manual

7
Cleaning and Maintenance
WARNING
Risk of electric shock! To prevent electric shock, unplug
beforecleaning.
WARNING
Risk of electric shock! During cleaning do not immerse the
electrical parts of the product in water or other liquids. Never hold
the product under running water.
CAUTION
Risk of burns! The product is hot during and after operation.
Allowthe product to cool down before cleaning and maintenance.
CAUTION
Risk of injury! There are 2 sharp metal tubes inside the lower part
of the locking latch (I) and the brew spout (D). Do not put fingers
inside the locking latch (I) and the brew spout (D).
NOTICE
Never use corrosive detergents, wire brushes, abrasive scourers,
metal or sharp utensils.
Cleaning the brew chamber (C)
NOTICE
Clean the brew chamber (C) weekly.
• Press the locking latch release button (J) to open the locking latch (I).
• Slide the brew chamber (C) out.
• Remove the used K-Cup
®
capsule.
• Press on the 3 mounting hooks and remove the brew spout (D) from the brew
chamber (C).
1
2
C
D
• Clean the brew spout (C) and the brew chamber (D) with warm, soapy water and rinse.
• Dry the parts after cleaning.