User Manual
6
Operation
Brewing preparation
NOTICES
Use original K-Cup
®
capsules with the product only.
If using a taller cup, remove the drip tray (K) and the drip
container (L) before placing the cup under the brew spout (D).
Fill the water tank (B) of this product with water only. Do not fill
with other liquids or foods, except when following the specific
instructions in this guide for descaling or cleaning the product.
• Fill the water tank (B) with cold, drinking water to a level anywhere between the
MIN and MAX indicators. Cover the water tank (B) with the water tank lid (A).
• Plug in the product to the wall outlet.
• Press the locking latch release button (J) to open the locking latch (I).
• Slide the brew chamber (C) out.
• Insert a K-Cup
®
capsule into the brew chamber (C).
• Slide the brew chamber (C) back in.
• Close the locking latch (I) to lock the brew chamber (C) in place.
• Place an appropriate cup on the drip tray (K).
Brewing coffee
NOTICE
The water level should be between the MIN and MAX level
indicators.
NOTICE
To stop the brewing at any point, press the
selected small cup button (F) or large cup button (G).
• Press the POWER button (H). All the buttons light up.
• Select the brew size by pressing the small cup button (F) or large cup button (G).
The small cup (F) or large cup (G) button starts flashing.
• The brewing is complete when the selected small cup button (F) or
large cup button (G) stops flashing.
• Press the POWER button (H) to switch the product off. All the buttons go off.
• Unplug the product from the wall outlet.
CAUTION
Risk of burns! Do not remove the cup from the drip tray (K) before
the brewing is complete. Do not open the locking latch (I) and the
brew chamber (C) for 5 minutes after operation.
NOTICE
The product switches off automatically after 5 minutes if there is no
operation.
NOTICE
Remove the empty K-Cup
®
capsule from the brew chamber (C)
aftereach use.