User Manual
5
Intended Use
• This product is intended for brewing single serve K-Cup
®
capsules.
• This product is intended for household use only. It is not intended for
commercialuse.
• This product is intended to be used in dry indoor areas only.
• No liability will be accepted for damages resulting from improper use or
non-compliance with these instructions.
Before First Use
• Check for transport damages.
• Clean the product before first use.
• Place the product on a dry, level and heat-resistant surface.
• Before connecting the product to the power supply, check that the power supply
voltage and current rating corresponds with the power supply details shown on
the product rating label.
• Perform the internal cleaning before using the product for the first time.
DANGER
Risk of suffocation! Keep any packaging materials away from
children – these materials are a potential source of danger, e.g.
suffocation.
NOTICE
Always position the brew chamber (C) correctly in place.
• Fill the water tank (B) with cold water to the MAX level indicator. Cover the water
tank (B) with the water tank lid (A).
• Place a large cup on the drip tray (K).
• Plug in the product to the wall outlet.
• Press the POWER button (H) to initiate the priming of the internal boiler.
• After the priming is finished, the POWER button (H) stops flashing.
• Perform the internal cleaning process (see “Internal cleaning”).