User Manual

4
IMPORTANT SAFEGUARDS
Read these instructions carefully and retain them for future use. If this
product is passed to a third party, then these instructions must be
included.
When using electrical appliances, basic safety precautions should always be followed
to reduce the risk of fire, electric shock, and/or injury to persons including the
following:
Read all instructions.
Do not touch hot surfaces. Use any handles or knobs.
To protect against fire, electrical shock, or injury to persons DO NOT immerse
cord, plugs, or appliance in water or other liquid.
Close supervision is necessary when any appliance is used by or near children.
Unplug from outlet when not in use and before cleaning. Allow to cool before
putting on or taking off parts and before cleaning the appliance.
Do not operate any appliance with a damaged cord or plug, or after the appliance
malfunctions or has been damaged in any manner. Return appliance to the
nearest authorized service facility for examination, repair or adjustment.
The use of accessory attachments not recommended by the appliance
manufacturer may result in fire, electric shock or injury to persons.
Do not use outdoors.
Do not let cord hang over edge of table or counter or touch hot surfaces.
Do not place on or near a hot gas or electric burner, or in a heated oven.
Do not use appliance for other than intended use.
This product is intended for household use only.
Do not immerse in water.
A short power-supply cord is to be provided to reduce risks resulting from
becoming entangled in or tripping over a longer cord.
Extension cords are available and may be used if care is exercised in their use.
If an extension cord is used,
- the marked electrical rating of the detachable power-supply cord or extension
cord should be at least as great as the electrical rating of the appliance.
- the longer cord should be arranged so that it will not drape over the counter top
or table top where it can be pulled on by children or tripped over.
This appliance has a polarized plug (one blade is wider than the other). To reduce
the risk of electric shock, this plug is intended to fit into a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not modify the plug in any way.
Scalding may occur if the lid is removed during the brewing cycles.
To disconnect, press the power button, then remove plug from wall outlet.
Extreme caution must be used when moving an appliance containing hot food,
hot oil, water or other hot liquids.
SAVE THESE INSTRUCTIONS