Instruction manual

Main Screen

Installation Introduction

FAQs Quick Start

File FormatsMain ScreenColor Editor

Now click on the newly programmed “Write Card”

button to save the designs to the card. You will

be given a warning that the card will be overwrit-

ten as shown in Figure MS-8a. You will be eras-

ing all of the previously written designs and

replacing them with the new ones. Click Yes

and the transfer will start. Click No to cancel this

operation. You will now see a red light in the

center of the box. This means that The Mini Amaz-

ing Box II is transferring the designs to the card.

Only the machine choices appropriate for the card

inserted in the slot will be offered (example: the

right side slot is for format PES/HUS so only Baby

Lock/Brother/Deco/Simplicity/Viking machines will

be offered). Select the appropriate machine

model.

You can set each “Write” button to reflect your

personal machine. If you own more than one

model you can set the buttons accordingly.

Once you set the “Write” button to a certain

machine it will remain set until you change it.

If you do not see your machine model you can

select a different machine by the same

manufacturer with the same single sewing field

parameters. You can select from the list provided

at the end of this section.

Tip Tip