User's Manual

Anhui Huami Healthcare Co.,Ltd.
- Do not use in the presence of flammable anesthetics, drugs, or pressurized oxygen
(such as in a hyperbaric chamber, ultraviolet sterilizer, or oxygen tent).
- Do not use this device during an MRI or CT scan.
- Keep out of reach of infants, small children, or anyone incapable of using the device
properly.
- The device has not been tested for use on infants weighing less than 10kg. Huami
does not recommend using on humans less than 10kg.
- Do not use this device with a defibrillator.
- Huami does not recommend using on individuals with a cardiac pacemaker, ICDs, or
other implanted electronic devices.
- The disposal of the device and accessories follows customary electronic waste
recycling procedures.
- In case of a software crash or termination, please restart the software and re-record.
- The changes in the mobile phone memory (such as plugging, unplugging, or
replacing the SD card) may cause operation failure and historical data loss.
- This produce is not allowed to be used together electrosurgical instruments.
- To keep the device away from fire, do not heat it, otherwise the internal battery may
explode.
5. Warning: MR-unsafe!
- This device is NOT MRI Compatible
- Do not expose the device to a magnetic resonance (MR) environment.
- The device may present a risk of projectile injury due to the presence of
ferromagnetic materials that can be attracted by the MR magnet core.
- Thermal injury and burns may occur due to the metal components of the device that
can heat during
- MR scanning.
- The device may generate artifacts in the MR image.
- The device may not function properly due to the strong magnetic and radiofrequency
fields generated by the MR scanner.
6. Storage and Handling
Do not store the unit in:
- Locations exposed to direct sunlight.
- Locations subject to high temperatures and high humidity.
- Wet or damp locations where water may get on the unit.
- Dusty locations.
- Near fires or open flames.
- Locations exposed to intense vibration.
- Locations exposed to strong electromagnetic fields.
7. Maintenance
Cleaning and Disinfection method
- Clean the device using an alcohol-based sanitizer before each use.