Installation Guide

1. Prior to installation,install
mounting plate into the electrical
outlet box with mounting screws.
Drive screws completely to the end
of the junction box.
2.
Connect supply wires to wires
on fixture with wire nuts or push
wires into Quick Connector.
Connect white to white, black to
black, and copper wire to copper
wire as grounding connection.
3. Completing the installation
by pushing the fixture springs
towards the open bracket into the
junction box.
PACKAGE CONTENTS
This LED light is suitable to be dimmed by
B
C
D
E
Wire Cutters
Phillips
Screwdriver
Pliers
TOOLS AND MATERIALS REQUIRED:
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO
PERSONS READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
PART
A
B
C
D
E
DESCRIPTION
QTY
Electrical outlet box
Mounting
plate
Mounting
screws
Black
Ground
White
Wire nut
1
2
1
2
1
Made in China
Power connector
Mounting screws
Mounting plate
Spring
Disc light
FLUSH MOUNT
SAFETY PRECAUTIONS:
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION
OF THE PRODUCT AND THE HAZARDS INVOLVED.
3. CAUTION – RISK OF ELECTRIC SHOCK. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE
CORRECT BRANCH CIRCUIT CONDUCTOR.
LED disc light
LED-SM63DL
A
LED DISC LIGHT
Wiring supplies
as required by
your local
Provincial or State
Electrical code
Major Brand model# 6633, Major Brand
model# 6672.
Dimming levels will vary by dimmer.