Instruction Manual Karaoke Machine
Battery Precautions • WARNING: Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type of batteries. • Only use the specified size and type of batteries for this product. • If the product will not be used for a long period of time, remove batteries to prevent damage or injury from possible battery leakage. • Do not try to recharge a battery not intended to be recharged—this can lead to overheating and rupture. (Follow battery manufacturer’s instructions.
Important Safety Information 1) Keep this Instruction Manual for any future reference. 2) Adhere to all Warnings. 3) Do not place this product in or near water 4) Only use a dry cloth to clean this product. 5) Keep ventilation openings clear; do not block any of this product’s vents/openings. 6) Install in accordance with manufacturer’s instructions. 7) Do not install near any heat sources (i.e. radiators, heat registers, stoves, amplifiers or any other items that produce heat).
Thank you for purchasing this product! Please read this Instruction Manual carefully before using this product to ensure proper use. Support We want you to be 100% satisfied and appreciate your feedback. If this product falls short of your expectations, please contact us at support@amasing.
Remote Control 1) Power Places machine into power saving (standby) mode.
5) Digital Display Displays the battery capacity, FM frequency, Modes, and music play-time.
Control Panel 7 1 14 10 3 12 13 2 5 4 11 6 16 8 9 1) Power ON/OFF • Power with Disco: Press the left side of the toggle-switch to turn on the karaoke machine and disco ball. 15 the battery is fully charged. 4) Music modes There are 5 modes to choose from: • Power with no disco: Press the right side of the toggle-switch to turn on the karaoke machine only (no disco ball). • Line-in mode: Use included cable (AUX or Audio to AUX) to connect the karaoke machine to your device or T.V.
Get Started The Amasing Karaoke Machine is easy and fun to use! Just plug, play, belt your fave songs… and rock on! 1) Insert two AA batteries into each microphone. Then turn on the microphone - you will see a green light flash once. The microphone is ready to use. 2) Plug the 12V DC plug into the front of the machine and the other end into a wall outlet. The battery light indicator will turn on. Indicating charging in process. 3) Allow for an initial 8 hour charge before using for the first time.
