Installation Guide

1 2
54
App Setup
Once you have completed the app setup, you
will automatically be enrolled into the 30-day
free trial which consists of features such as
human and vehicle detection, facial
recognition up to 10 faces, 10-second video
alert playback, 30 days of continuous video
storage, and more!
Follow the instructions on the Amaryllo app to
complete the setup.
Tip: You must log in with a Gmail account to activate the continuous
video storage that's included in the 30-day trial.
Quick Setup
Triton
LED Indicator
Safety Precaution
Need Help?
System Requirement
Get the App
In order for Triton to connect to your
home Wi-Fi network, please make
sure your router is transmitting at
2.4 GHz (802.11 b/g/n)
2.4 GHz (802.11 b/g/n)
Camera Overview
Power on the Device
1. Screw in the device by placing it into a lightbulb socket, then,
gently turn clockwise until it is secure.
2. Slide the Back Latch (located on the back of the camera)
down with your thumb to allow rotation.
CAUTION:
Please make sure to turn off the power of the light socket before
installing Triton. To avoid damaging the light bulb screw, DO
NOT APPLY EXCESSIVE FORCE WHEN SCREWING TRITON
INTO THE SOCKET.
Congratulations!
BlueGreen
Your camera needs good air
circulation. Never install it in
any kind of small box or
enclosure as this can cause
overheating. The operating
temperature is -40°F to 140°F
(-40°C to 60°C).
Unlock the
Back Latch
2
1
3
To find troubleshooting tips or to get support, scan
the QR code below or visit:
www.amaryllo.us/support
All devices come with a limited one year warranty!
Scan the QR code below to take you to Amaryllo's
legal page: www.amaryllo.us/terms
Or if you need additional help, just contact us!
E-mail: [e-mail]
Phone: [phone] (toll-free)
Download the free
Amaryllo app to
get started.
Speaker
Back Latch
Height
10.9 inches
(28cm)
Width 5.1 inches (13cm)
Width 4.3 inches (11cm)
Reset
WPS
Power Indicator (Blue LED)
Solid Blue LED: Device is powered on.
Blinking Blue LED:
1. Camera is being accessed remotely.
2. Camera is waiting for setup.
Wi-Fi Indicator (Green LED)
Blinking Green LED: Camera is attempting to
connect to the Wi-Fi network.
Solid Green LED: Device has connected to the Wi-Fi.
Light Bulb Base*
( *Triton requires a dedicated
power switch.)
4 Infrared LEDs
(Night Vision)
Microphone
(Audio Detection)
Wi-Fi LED (Green)
Power LED (Blue)
Light Detection
High-Power
LED Lamp
PIR Sensor
(Motion Detection)