User guide
Table Of Contents
- Introduction
- Hardware setup
- Connection to AMARI UE Simbox
- LTE service
- Initial setting
- Create scenario using WebGui
- Run UE scenarios with WebGui
- Create scenario without WebGui
- Downlink and Uplink transfer using iperf
- NB-IOT devices
- Channel simulator
- logging
- Advanced options
- Troubleshooting
Chapter 7: Run UE scenarios with WebGui 23
7.2 Scenario example
• First create a scenario in UE scenario tab and call it My first test.
• Select Simulations tab and add ICMP ping:
• Click on Apply changes
• Go to UE Simulator tab.
• Click on red icon to power on UE and right click on UE:
• Select My first test. A new tab is created to follow scenario.
• Select scenario tab