User Manual

13

REMOTECONTROLOPERATION


Forremotetofunctionmakesuretheheaterispluggedinandmainpowerswitchlocatedonthe
bottomlefthandsideisatpositionI.
Whenoperatingtheremotemakesureyoupointtheremotetothecenterofthefireplaceandmake
sureeachtimeyoupressthebuttonthebuzzerinsidetheunitwillbeeponce.Ittakessometimefor
the receiver to respond to the transmitter. Do not PRESS the buttonsmore than once within two
secondsforcorrectoperation.
Poweron button:Thepower‐onbuttonattopleftcorneroftheremoteisthemainON/OFF
powerbutton.Thiswillturnoffallthefunctionsandthefireplacewillbeinstandbymode.

DISPLAY ON/OFF button:SwitchingthefireplaceflameandtraylightON/OFF.Ithasfunctionsof
settingmemory.
DISPLAY BLUE button: Adjust the blue color brightness of flame and tray.
DISPLAY YELLOW button: Adjust the yellow color brightness of flame and tray.
DISPLAY ORANGE button: Adjust the orange color brightness of flame and tray.
MOODLIGHTON/OFFbutton:SwitchingthemoodlightON/OFF.
ADJUSTbutton:Switchingthecolorofthemoodlight.
FLASHbutton:Switchesthemoodlightintoflashmode,thiscyclesthroughallmoodlightcolors.

HEATER ON/OFF button: Switching the heater ON/OFF. It has functions of setting memory.
HIGH button: Press the high button to switch the heater to high heat setting 1500W.
LOW button: Press the low button to switch the heater to low heat setting 750W.
TEMP. button: Press the TEMP. button to switch the heater to AUTO mode. Under this mode
the heater will operate in similar way as explained above for the manual operation.